|
| |
TM 9-2320-364-10
2-335
NOTE
It may be necessary to repeat Steps (14) through (17)
several times to clear hook arm from hook bar.
(14)
Move the joystick (1) to LOAD to allow top of lift-hook (10) to clear
hook-bar (8).
NOTE
Do not move truck forward more than 3 in. (76.2 mm) to
prevent flatrack from pulling over edge of dock.
(15)
Release the service brake pedal (9) and place transmission range selector
(7) in Drive (D).
(16)
Move truck forward approximately 3 in. (76.2 mm) and apply service brake
pedal (9).
(17)
Move the joystick (1) to UNLOAD to disengage hook from hook-bar (8).
(18)
Release the service brake pedal (9) and move the truck forward
approximately 5 ft. (1.5 m).
(19)
Apply service brake pedal (9).
(20)
Move joystick (1) to LOAD until LHS NO TRANS light (3) is extinguished
indicating LHS is completely stowed.
|
