|
| |
TM 9-2320-364-10
2-339
b.
Outrigger Jacks Setup.
Use caution when handling outrigger pads. Sharp edges can
injure hands.
NOTE
Both outrigger pads are the same. Left side is shown.
(1)
Remove two safety pins (7) and remove outrigger pad (8) from crane
subframe (9).
(2)
Remove two retaining pins (10) from outrigger pad (8).
(3)
Clean all of the foreign material from socket (11) in outrigger pad (8) and
from rod end of outrigger jack cylinder (12).
(4)
Position the outrigger pad (8) directly below outrigger jack cylinder (12).
(5)
Repeat Steps (1) through (4) to set up the outrigger pad (8) on other side.
|
