|
| |
TM 9-2320-364-10
2-347
Keep boom clear of all electrical lines and other obstacles while
operating crane. Serious injury or death could result upon
contact.
Ensure that area is clear of personnel before moving SWING
control lever. Boom should be swung slowly enough so crane
operator has complete control. If operator cannot see load
during operation, operate crane from REMOTE CONTROL
UNIT. Boom moving out of control could cause serious injury
or death.
Operator must keep control of load at all times. If necessary,
attach cargo tiedowns to load for use as a control tether. Load
moving out of control could cause serious injury or death.
Boom must be above hook arm, flatrack and truck load for
clearance. Hitting obstacles with boom may cause damage to
boom or truck.
NOTE
Operate control levers with light, even pressure. Moving
lever slightly will cause slow movement of crane.
Moving lever to full travel will cause faster movement of
crane.
(7)
Move SWING control lever (25) to CCW position to move boom (22)
counterclockwise.
|
