|
| |
TM 9-2320-364-10
2-687
(42)
Set transmission range selector (2) to 1.
(43)
Release parking brake (1).
(44)
Release service brake pedal (33).
(45)
Push WINCH IN/OUT switch (32) to IN and apply slight pressure to
throttle control (34).
Keep cable tight at all times so cable does not get tangled with truck.
(46)
Adjust position of throttle control (34) to change engine speed as needed
to keep cable tight and truck moving.
(47)
When truck is on solid ground, release WINCH IN/OUT switch (32).
(48)
Apply parking brake (1).
(49)
Set transmission range selector (2) to Neutral (N).
(50)
Push WINCH IN/OUT switch (32) to OUT and pay out cable (9) until all
tension is off cable.
(51)
When all tension is off cable (9), release WINCH IN/OUT switch (32) to
center position.
|
