| |
TM 9-2320-364-10
2-692
2-45. SELF-RECOVERY WINCH (SRW) (CONT).
(71)
Push winch control lever (8) rearward and reel in cable (9).
(72)
When the clevis (12) is approximately one ft. (0.31 m) from winch (14),
release winch control lever (8).
(73)
Install clevis (12) to eyelet (13) with clevis pin (11) and cotter pin (10).
Do not reel in cable too tightly or injury to personnel may
occur if too much tension is applied to eyelet.
(74)
Push the winch control lever (8) rearward and take out slack in cable.
(75)
When slack is removed from cable (9), release winch control lever (8).
|