|
| |
TM 9-2320-364-10
2-694
2-45. SELF-RECOVERY WINCH (SRW) (CONT).
Engine speed must be at idle before using hydraulic selector
switch, or damage to equipment may result.
(7)
Set hydraulic selector switch (6) to CRANE/SRW.
(8)
Move free spooling lever (7) to ENGAGE position.
(9)
Push winch control lever (8) forward to pay out small amount of cable (9).
(10)
Release winch control lever (8).
(11)
Remove cotter pin (10) and clevis pin (11) from clevis (12).
(12)
Remove clevis (12) from eyelet (13).
|
