|
| |
TM 9-2320-364-10
2-760
2-56. TOW HOOKUP PROCEDURES (CONT).
NOTE
Perform Steps (26) through (30) if adapter was installed.
(26)
With the aid of assistants, lift end of tow bar (1) approximately 16 in.
(41 cm) off the ground and block using a chock block.
NOTE
Wedge in Step (27) is only used for towing M989 and
M989A1 trailers.
(27)
Remove cotter pin (12), nut (13), two washers (14), screw (15), wedge (16)
and plate (17) from adapter (11).
(28)
Remove adapter (11) from tow bar (1).
(29)
Install plate (17) and wedge (16) on adapter (11) with two washers (14),
screw (15), nut (13) and cotter pin (12).
(30)
Stow adapter (11).
|
