|
| |
TM 9-2320-364-10
2-779
Engine speed must be at idle before using hydraulic selector
switch, or damage to equipment may result.
(8)
Start engine on operable truck and turn hydraulic selector switch (12) to
AUTO position.
(9)
If disabled truck has a failure in the hydraulic system, but not the electrical
system, go to Step (10). If both systems have failed, go to Step (11).
Engine speed must be at idle before using hydraulic selector
switch, or damage to equipment may result.
(10)
On disabled truck turn ignition switch (13) to ON and turn hydraulic
selector switch (12) to AUTO. Operate joystick (14) to return LHS to the
stowed position. Go to Step (14).
|
