|
| |
TM 9-2320-364-10
2-787
Engine speed must be at idle before hook arm cylinders are
fully extended. Damage to equipment may result.
(6)
Unload flatrack from truck as follows:
(a)
Press and hold free flow valve override button (11) and manual hook
arm UP button (12) and extend hook arm cylinders (13) until hook
arm cylinders are fully extended.
(b)
Press and hold free flow valve override button (11) and manual main
frame UP button (14) until unloaded.
To avoid equipment damage ensure that main frame cylinders
do not complete full retraction while operating at engine
speeds above idle.
(7)
Load flatrack onto truck as follows:
(a)
Press and hold manual free flow valve override button (11). Press
manual main frame DOWN button (15) until main frame cylinders
(16) are fully retracted.
(b)
Press and hold manual override button (11) and depress manual hook
arm DOWN button (17) until flatrack is in transit position.
(c)
Press transit valve button (18) before moving truck.
|
