|
| |
TM 9-2320-364-10
3-25
Table 3-1. Troubleshooting - CONT.
Malfunction
Test or Inspection
Corrective Action
SELF-RECOVERY WINCH (SRW)
1.
SELF-RECOVERY WINCH DOES NOT WORK.
Step 1. Make sure hydraulic selector switch (1) is set to CRANE/SRW.
Step 2. Check for low fluid main hydraulic reservoir (2).
If fluid level is low, notify Unit Maintenance.
If fluid level is not low, go to Step 3.
Step 3. Make sure free spooling lever (3) is engaged.
If lever is not engaged, engage.
If lever is engaged and SRW still does not function, notify
Unit Maintenance.
|
