|
| |
TM 9-2320-364-10
3-44
Table 3-1. Troubleshooting - CONT.
Malfunction
Test or Inspection
Corrective Action
CONTAINER HANDLING UNIT (CHU) (CONT).
4.
FLIPPER AND FLIPPER LOCK WILL NOT ENGAGE
AND/OR DISENGAGE PIVOT PIN WHEN LIFTING FRAME
IS IN STOWED POSITION (CONT).
Step 2.
Check air pressure gage.
If air pressure gage (4) reads between 75 psi (517 kPa), start engine and
build up air pressure to 125 psi (861 kPa).
If problem is still present, notify Unit Maintenance to adjust stow
hooks (2), cone weldment (3) and/or rotary paddles (5).
AIR
VALVES
2
4
3
5
|
