|
| |
TM 9-2320-364-20-2
2-1785
(1) Measure gap between brake shoe and
drum (Para 12-3).
(a) If there is no gap, adjust brakes
(Para 12-3).
(b) If there is a gap, perform Steps (2)
through (5) below.
(2) Cage air chamber (Para 12-10).
(3) Remove brake drum and air chamber
(Para 13-3 and 12-10).
(4) Inspect brake shoes and wedges
(Para 12-2).
(a) If brake shoes and/or wedges are
faulty, replace brakes shoes
and/or wedges (Para 12-2).
(b) If shoes and wedges are OK,
notify DS Maintenance.
(5) Install brake drum and air chamber
(Para 13-3 and 12-10).
VISUAL INSPECTION
Truck must be on level ground and wheels must be chocked before parking brake is released. Otherwise,
truck may roll and cause injury to personnel.
Apply PARKING BRAKE
(TM 9-2320-364-10).
(1) If parking brakes on Axle No. 3
do not apply, fault not corrected.
Notify DS Maintenance.
(2) If parking brakes on Axle No. 3
do apply, fault has been corrected.
VERIFY REPAIR
|
