|
| |
TM 9-2320-364-20-2
2-1897
(1)
Start engine and build pressure
to 125 4 psi (861 28 kPa)
(TM 9-2320-364-10).
(2)
Turn OFF ENGINE switch.
(a) If both air bags fail to inflate, go to
Step 4 of this Fault.
(b) If only one air bag inflates, go to
Step 2 of this Fault.
VISUAL INSPECTION
NOTE
PLS vehicle system pressure must be
between
90 and 125 4 psi (620 and 861 28 kPa) to
begin troubleshooting the air system. If air
system pressure cannot be maintained within
this range, refer to Air System
Troubleshooting.
Air hoses and valves listed in this
troubleshooting procedure are illustrated and
located in Figure 2-47.
|
