|
| |
TM 9-2320-364-20-2
2-1311
(1) Loosen five screws and remove left
front composite light cover, lamp and
performed packing. Discard
performed packing.
(2) Set multimeter select switch to ohms.
(3) Is continuity measured across lamp?
(a) If there is no continuity, replace
lamp.
(b) If there is continuity, lamp is OK.
CONTINUITY TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|
