|
| |
TM 9-2320-364-20-2
2-1343
(1) Turn ON ENGINE switch
(TM 9-2320-364-10).
(2) Turn marker light switch to
center position.
(3) Inspect clearance, side marker, and ID
lights for operation.
(a) If all listed lights fail to operate,
fault is between clearance lights,
circuit breaker CB2 and wire 1920
and 1008 splice. Turn OFF
ENGINE switch and go to Step 5
of this Fault.
(b) If one of the listed lights operates,
fault is between faulty light lamp or
LED and wire 1012 first splice.
Turn OFF ENGINE switch and go to
Step 2 of this Fault.
VISUAL INSPECTION
SIDE MARKER LIGHT
|
