|
| |
TM 9-2320-364-20-2
2-838
3. CODE 14: FORWARD PRESSURE SWITCH INOPERATIVE (CONT).
3.
Repair wire(s) 101
and/or 118 (see
schematic
Fig 2-22) or notify DS
Maintenance.
Verify repair, go to
Step 4 of this Fault.
YES
NO
“CHECK TRANS” light ON.
“DO NOT SHIFT” light OFF.
Circuit breakers not tripped.
May also have a code 32.
No false code 14.
No short/open circuit in forward
pressure switch circuit inside
transmission.
Cab/transmission wire harness
faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If there is no continuity in wires
118 and 101 of cab/
transmission wire harness
between connectors MC10 and
MC19, ATEC ECU will register a
code 14 fault.
WARNING
Is
continuity
measured on wires 101 and
118 between ATEC ECU
harness connector MC10,
terminals 2N and 3P and
transmission connector
MC19, terminals E and F?
Read WARNING
on Page 2-839
|
