|
| |
TM 9-2320-364-20-2
2-1407
(1) Set multimeter select switch to ohms.
(2) Is there continuity between wire 1435
horn connector and a known
good ground?
(a) If there is no continuity, repair
wire 1435 (see schematic
Fig 2-36) or notify DS
Maintenance.
(b) If there is continuity, replace horn
(Para 7-85).
CONTINUITY TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|
