|
| |
TM 9-2320-364-20-2
2-1679
(1) Remove eight screws, lockwashers,
washers and left side noise
panel. Discard lockwashers.
(2) Check transmission oil hoses 2279,
2382, 2312, 2311 and 2310 for
damage, crimps or leaks.
(a) If hoses are damaged, crimped
or leaking, tighten fittings
or replace hoses (Para 3-10).
(b) If there are no leaks, crimps or
damage, hoses and fittings
are OK.
VISUAL INSPECTION
Allow engine to cool before performing troubleshooting maintenance. If necessary use insulated pads
and gloves. Hot engine components will burn and cause injury to personnel.
Check transmission oil filter for leaks and
damage.
(1) If oil filter is leaking or
damaged, tighten or replace
filter (Para 8-4).
(2) If there are no leaks or damage,
oil filter is OK.
VISUAL INSPECTION
|
