|
| |
TM 9-2320-364-20-3
2-2897
Inspect the following crane hoses and
tubes (see schematic Fig 2-70):
tube from hose 2902 to main
hydraulic pressure valve.
hose from four valve bank
to accumulator.
load sensing hose from
hose 2776 to four valve bank.
load sensing hose from four
valve bank to two valve bank.
load sensing hose from four
valve bank to three valve bank.
(1) If hose or tube is leaking, tighten
connection or replace hose or tube
(Para 20-3; see schematic
Fig 2-70).
(2) If hoses and tubes are OK, go to
Step 3 of this Fault.
VISUAL INSPECTION
|
