|
| |
TM 9-2320-364-20-3
2-2965
(1) Check 90 gear box mounting
hardware (Para 14-13).
(a) If gear box is not securely
mounted tighten or replace
mounting hardware (Para 14-13).
(b) If gear box mounting hardware is
OK, go to Step (2) below.
(2) Disconnect steering shaft from output
shaft of 90 gear box (Para 14-13).
(3) Turn steering wheel by hand while
checking for binding or excessive
play.
(a) If binding or excessive play is
present, replace gear box
(Para 14-13).
(b) If binding or excessive play is not
present, gear box is OK.
(4) Connect steering shaft to output
shaft of 90 gear box (Para 14-13).
90 GEAR BOX TEST
(1) Start engine (TM 9-2320-364-10).
(2) Check steering while operating the
truck.
(a) If there is excessive play in
steering, fault not corrected.
Turn OFF ENGINE switch and
notify DS Maintenance.
(b) If there is no excessive play in
steering, fault has been corrected.
(3) Turn OFF ENGINE switch.
VERIFY REPAIR
|
