| |
TM 9-2320-364-20-3
2-2073
(1) Disconnect connector from transducer
on front manifold.
(2) Set multimeter select switch to
volts dc.
(3) Connect positive (+) multimeter lead
to black wire terminal at transducer
connector.
(4) Connect negative () multimeter lead
to front manifold ground braid.
(5) Turn ON ENGINE switch
(TM 9-2320-364-10).
(6) Push CTIS START button.
(a) If 4.7 to 5.2 vdc are not present,
turn OFF ENGINE switch and
replace front manifold
(Para 13-8).
(b) If there are 4.7 to 5.2 vdc present,
turn OFF ENGINE switch and
go to Step 15 of this Fault.
VOLTAGE TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|