|
| |
TM 9-2320-364-20-3
2-2086
10. FRONT MANIFOLD CLICKS CONTINUALLY/LOW AIR LIGHT FLASHING (CONT).
21.
Are 50 to 60 ohms measured
between quick release valve
solenoid, terminal 1 and
terminal 2?
Replace solenoid
(Para 13-10). Verify
repair, go to Step 28 of
this Fault.
YES
NO
System air pressure greater
than 110 psi (758 kPa).
Rear manifold not clicking
continually.
CTIS wire harness
connections OK.
CTIS controller OK.
CTIS wire harness OK.
Air line 2993 and fittings OK.
CTIS front manifold not
leaking.
Quick release valve OK.
24 vdc input to quick release
valve.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Resistance test.
STE/ICE-R#91.
If there are not 50 to 60 ohms
at quick release valve solenoid,
solenoid is faulty.
Quick release valve solenoid
faulty.
CTIS front manifold faulty.
|
