|
| |
TM 9-2320-364-20-3
2-2096
10. FRONT MANIFOLD CLICKS CONTINUALLY/LOW AIR LIGHT FLASHING (CONT).
26.
Are 22 to 28 ohms resistance
measured between inflate
valve terminals 1 and 2?
Replace inflate valve
solenoid (Para 13-10).
Verify repair, go to
Step 28 of this Fault.
YES
NO
System air pressure greater
than 110 psi (758 kPa).
Rear manifold not clicking
continually.
CTIS wire harness
connections OK.
CTIS controller OK.
CTIS wire harness OK.
Air line 2993 and fittings OK.
CTIS front manifold not
leaking.
Front manifold OK.
No air pressure at transducer.
10 to 14 vdc present at inflate
valve connector.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Resistance test.
STE/ICE-R#91.
If there are not 22 to 28 ohms
at inflate valve solenoid,
solenoid is faulty.
Inflate valve solenoid faulty.
Inflate valve faulty.
|
