| |
TM 9-2320-364-20-3
2-2189
Allow engine to cool before performing troubleshooting maintenance. If necessary use insulated pads
and gloves. Hot engine components will burn and cause injury to personnel.
Wear safety goggles when performing leakage tests on valves. Failure to do so may result in serious eye injury
due to high pressure air.
Check air line 2001 for damage, crimps or
leaks (Para 12-35 and schematic
Fig 2-50).
(1) If air line 2001 is damaged, crimped
or leaking; tighten fittings, or replace
air line (Para 12-36 and schematic
Fig 2-50).
(2) If there are no leaks, crimps, or
damage; air line 2001 and fittings
are OK.
VISUAL/AUDIBLE INSPECTION
|