|
| |
TM 9-2320-364-20-3
2-2215
Wear safety goggles when performing leakage tests. Failure to do so may result in serious eye injury due
to high pressure air.
(1) Start engine (TM 9-2320-364-10).
(2) Run engine at idle until air
pressure gage reads 125 4 psi
(861 28 kPa).
(3) Turn OFF ENGINE switch.
(4) Check drain valves on air reservoirs
for leaks or damage.
(a) If drain valves are leaking or
damaged, replace valves (Para
12-27 through 12-31).
(b) If drain valves are not leaking or
damaged, valves are OK.
VISUAL/AUDIBLE INSPECTION
|
