| |
TM 9-2320-364-20-3
2-2221
Check air reservoirs for cracks, dents, split
seams, holes or other damage.
(1) If air reservoirs are damaged,
replace air reservoir(s) (Para
12-27 through 12-31).
(2) If air reservoirs are not damaged,
reservoirs are OK.
VISUAL/AUDIBLE INSPECTION
(1) Start engine (TM 9-2320-364-10).
(2) Run at idle for 10 minutes.
(3) Turn OFF ENGINE switch.
(4) Observe air pressure gage.
(a) If air pressure gage drops below
125 4 psi (861 28 kPa), fault
not corrected. Notify DS
Maintenance.
(b) If air pressure gage stays at
125 4 psi (861 28 kPa), fault
has been corrected.
VERIFY REPAIR
|