|
| |
TM 9-2320-364-20-3
2-1923
Wear safety goggles when performing leakage tests on valves. Failure to do so may result in serious eye
injury due to high pressure air.
(1) Check wheel/tire assembly for leaks
(a) If wheel/tire assembly is leaking,
repair wheel/tire assembly
(Para 13-2).
(b) If there are no leaks, wheel/tire
assembly is OK.
(2) Install wheel cover and four nuts.
AUDIBLE/VISUAL INSPECTION
(1) Start engine (TM 9-2320-364-10).
(2) Set CTIS controller selector to
HIGHWAY.
(3) Press CTIS START button.
(a) If tire does not inflate, fault not
corrected. Turn OFF ENGINE
switch and notify Supervisor.
(b) If tire inflates, go to Step (4)
below.
(4) Set CTIS controller selector to
CROSS COUNTRY.
(5) Press CTIS START button.
(a) If tire does not deflate, fault not
corrected. Turn OFF ENGINE
switch and notify Supervisor.
(b) If tire deflates, fault has been
corrected.
(6) Turn OFF ENGINE switch.
VERIFY REPAIR
|
