| |
TM 9-2320-364-20-3
2-2363
Inspect LHS hydraulic hoses 2881,
2882, 2891 and 2892 for damage,
crimps or leaks.
(1) If hoses are damaged, crimped
or leaking; tighten fittings or
replace hoses (Para 20-3
and schematic Fig 2-54).
(2) If there are no leaks, crimps
or damage; hoses and fittings
are OK.
VISUAL INSPECTION
High pressure hydraulics [oil under 3,700 psi (25,512 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|