|
| |
TM 9-2320-364-20-3
2-2403
Inspect LHS hydraulic hoses 2887,
2888, 2889, 2890, 2666 and 2588 for
damage, crimps or leaks.
(1) If hoses are damaged, crimped or
leaking; tighten fittings or replace
hoses (Para 20-3 and schematic
Fig. 2-55).
(2) If there are not leaks, crimps or
damage; hoses and fitting are OK.
VISUAL INSPECTION
High pressure hydraulics [oil under 3,700 psi (25,512 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|
