| |
TM 9-2320-364-20-3
2-2577
(1) Set multimeter select switch to ohms.
(2) Is there continuity between connector
terminal 1 and crane main junction
box terminal 14.
(a) If there is no continuity, repair
white wire (see schematic
Fig 2-58) or notify DS
Maintenance.
(b) If there is continuity, white wire is
OK.
CONTINUITY TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|