| |
TM 9-2320-364-20-3
2-2721
Inspect tubes and hoses around four valve
bank for leaks and damage.
(1) If hoses are damaged, crimped or
leaking, tighten loose fittings or
repair hoses (Para 20-3 and
schematic Figs 2-59 through 2-64).
(2) If hoses are not damaged, crimped
or leaking, go to Step 2 of this
Fault.
VISUAL INSPECTION
High pressure hydraulics [oil under 3,100 psi (21,374 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|