|
| |
TM 9-2320-364-20-3
2-2751
Inspect two hoses between BOOM control
and cylinders and three hoses between
cylinders for leaks and damage.
(1) If hoses are damaged, crimped or
leaking repair hoses (Para 20-3
and schematic Fig 2-61).
(2) If hoses are not crimped or leaking,
notify DS Maintenance.
VISUAL INSPECTION
High pressure hydraulics [oil under 3,100 psi (21,374 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|
