| |
TM 9-2320-364-20-3
2-2755
Inspect hoses and tubes between
TELESCOPE valve and cylinders and
three hoses between cylinders for
damage, crimps or leaks.
(1) If hoses are damaged, crimped or
leaking secure loose fittings repair
hose (Para 20-3 and schematic
Fig 2-64) or notify DS
Maintenance.
(2) If hoses are not damaged,
crimped or leaking, notify DS
Maintenance.
VISUAL INSPECTION
High pressure hydraulics [oil under 3100 psi (21,374 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|