|
| |
TM 9-2320-364-20-3
2-2759
Inspect hoses and tubes between HOIST
valve and hoist motor manifold, hose
between manifold and motor and hose
between motor and brake for damage,
crimps or leaks.
(1) If hoses are damage, crimps
or leaks secure loose fittings
repair hose (Para 20-3 and
schematic Fig 2-62).
(2) If hoses are not crimped or
leaking, notify DS Maintenance.
VISUAL INSPECTION
High pressure hydraulics [oil under 3100 psi (21,374 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|
