|
| |
TM 9-2320-364-20-3
2-2763
Inspect hoses between SWING valve and
swing motor manifold for damage, crimps
or leaks.
(1) If hoses are damaged, crimped or
leaking secure loose fittings repair
hose (Para 20-3 and schematic
Fig 2-60) or notify DS
Maintenance.
(2) If hoses are not damaged,
crimped or leaking, notify
DS Maintenance.
VISUAL INSPECTION
High pressure hydraulics [oil under 3100 psi (21,374 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|
