|
| |
TM 9-2320-364-20-3
2-2811/(2-2812 blank)
(1) Install HIGH IDLE switch with nut.
(2) Install POWER switch with nut.
(3) Start engine (TM 9-2320-364-10).
(4) Set crane POWER switch to ON
position.
(5) Press HIGH IDLE switch to LATCH
position and release.
(a) If high idle does not
engage and latch, fault not
corrected. Perform Steps (6)
through (8) below and notify DS
Maintenance.
(b) If high idle does engage
and latch, fault corrected.
(6) Stow crane.
(7) Set crane POWER switch to OFF
position.
(8) Turn OFF ENGINE switch.
VERIFY REPAIR
|
