|
| |
TM 9-2320-364-20-3
2-2817
Inspect hoses 2809, 2899 and 2886 for
leaks and damage (Fig 2-66).
(1) If hose is leaking or damaged,
tighten loose fittings or replace
hose (Para 20-3).
(2) If hoses are OK, go to Step 2 of
this Fault.
VISUAL INSPECTION
High pressure hydraulics [oil under 3,700 psi (25,512 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|
