|
| |
TM 9-2320-364-20-3
2-2842
5. CABLE CANNOT BE FREE-SPOOLED OUT FROM FRONT OR REAR OF TRUCK
(CONT).
2.
Repair rear cable
tension guide
(Para 18-15) or
replace rear guide
(Para 18-16).
Verify repair, go to
Step 4 of this Fault.
YES
NO
Spooling arm lever is in
DISENGAGE position.
Front cable tensioner and guide
OK.
Faulty rear cable tensioner or
guide.
Faulty cable.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Visual inspection.
Faulty cable tensioner or guide
may bind on cable and not allow
cable to be free-spooled out.
3.
Replace cable
(Para 18-17).
Verify repair, go to
Step 4 of this Fault.
YES
NO
Spooling arm lever is in
DISENGAGE position.
Front cable tensioner and guide
OK.
Rear cable tensioner or guide
OK.
Faulty cable.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Visual inspection.
Kinked or severely frayed cable
may bind in winch, tensioner or
guide.
WARNING
Are rear cable guide and
tensioner free of damage?
Is cable free of kinks or
severe cuts causing fraying?
Read WARNING
on Page 2-2843
|
