| |
TM 9-2320-364-20-3
2-2867
(1) Disconnect connector MC93 from
switch connector.
(2) Is there continuity on wire 1724
between connector MC93, terminal A
and hydraulic selector switch,
terminal 22?
(a) If there is no continuity, repair
wire 1724 (see schematic
Fig 2-52) or notify DS
Maintenance.
(b) If there is continuity, wire 1724
is OK.
CONTINUITY TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|