|
| |
TM 9-2320-364-20-4
12-70
12-17. RELAY SPRING VALVE NO. 2 REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(9)
Apply sealing compound to threads of
elbow (16).
(10)
Install elbow (16) in relay spring valve (23).
(11)
Apply sealing compound to threads of
elbow (12).
(12)
Install elbow (12) in relay spring valve (23).
(13)
Apply sealing compound to threads of
elbow (14).
(14)
Install elbow (14) in relay spring valve (23).
NOTE
Use existing screws to mount
service relay mounting
bracket.
Perform Steps (15) and (16)
only if installing new service
relay valve.
(15)
Remove two screws (26) and
lockwashers (27) from relay spring
valve (23). Discard lockwashers.
(16)
Install relay spring valve (23) on bracket (24)
with two screws (26) and lockwashers (27).
(17)
Install spring relay valve (23) and
bracket (24) on frame (25) with two
screws (21) and locknuts (22).
(18)
Install air line 2368 (19) on elbow (20).
(19)
Install air line 2369 (17) on elbow (18).
(20)
Install air line 2614 (15) on elbow (16).
(21)
Install air line 2660 (13) on elbow (14).
(22)
Install air line 2638 (11) on elbow (12).
|
