|
| |
TM 9-2320-364-20-4
12-74
12-18. SPRING BRAKE VALVE REPLACEMENT (CONT).
(9)
Remove elbows (18), (19) and (20) from
spring brake valve (21).
(10)
Remove two locknuts (22), spring brake
valve (21) and screws (23), from
bracket (15). Discard locknuts.
(11)
Remove tee (24), coupling (25) and
nipple (26) from spring brake valve (21).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Install air lines and fittings as
noted during removal.
(1)
Apply sealing compound on threads of
nipple (26), coupling (25) and tee (24).
(2)
Install nipple (26), coupling (25) and
tee (24) on spring brake valve (21).
(3)
Install two screws (23), spring brake
valve (21) and locknuts (22) on bracket (15).
(4)
Apply sealing compound on threads of
elbows (20), (19) and (18).
(5)
Install elbows (20), (19) and (18) in spring
brake valve (21).
|
