|
| |
TM 9-2320-364-20-4
12-81
(27)
With the aid of an assistant, remove four
locknuts (44), screws (45) and air dryer (17)
from bracket (43).
(28)
With the aid of an assistant, remove four
locknuts (44), screws (45), air dryer (16)
and after cooler (20) from bracket (43).
b.
Installation.
NOTE
Install air lines, tubes and fittings
as noted prior to removal.
(1)
With the aid of an assistant, position air
dryers (17) and (16) and after cooler (20)
against mounting bracket (43) and install
eight screws (45) and locknuts (44) on
mounting bracket (43). Tighten screws to
30 lb-ft (40 N.m).
NOTE
If air dryer guard is to be
installed, install only two screws
and locknuts in Step (2).
(2)
Install bracket (42) on bracket (43) with four
screws (41) and locknuts (40).
|
