| |
TM 9-2320-364-20-4
12-89
c.
Assembly.
Use care when installing springs.
Springs are under tension and
can act as projectiles when
released and could cause injury to
personnel.
(1)
Install spring (34), preformed
packings (31), (32) and (33) on upper
cover (28).
(2)
Install upper cover (28) on housing (9) with
six locknuts (30). Tighten locknuts to 150
200 lb-in (16 to 23 N.m).
(3)
Install plate (27), spring (26), preformed
packing (25) and valve (24) on upper
cover (28).
(4)
Install purge valve (29) to upper cover (28)
(5)
Install cannister assembly (23) in
cylinder (37).
(6)
Install desiccant cartridge (36) and
follower (35) in cannister assembly (23)
|