|
| |
TM 9-2320-364-20-4
12-118
12-26. WINDSHIELD WASHER CAB AIR REGULATOR REPLACEMENT (CONT).
Air regulator is preset. Do not
adjust regulator or damage to
equipment may result.
NOTE
Tag and mark lines and
fittings before removal.
Air regulator is mounted on
back side of plate.
(3)
Remove locknut (6), bracket (7) and screw
(8) from dash panel (9).
Use caution while removing air
regulator mounting plate, or
damage to equipment may result.
(4)
Remove air line 2071 (10) and hose (11)
from air regulator (12) and mounting
plate (13) from glove box (14).
(5)
Remove two locknuts (15), screws (16) and
air regulator (12) from air regulator
mounting plate (17). Discard locknuts.
(6)
Remove fitting (18) and elbow (19) from air
regulator (12).
|
