|
| |
TM 9-2320-364-20-4
12-132
12-28. AIR RESERVOIR NO. 2 REPLACEMENT (CONT).
(18)
Install two air reservoir brackets (15),
screws (25) and locknuts (24) on frame
(26).
(19)
With the aid of an assistant, position four air
reservoir mounting brackets (18), screws
(17) and locknuts (16) on two air reservoir
brackets (15).
(20)
With the aid of an assistant, position drain
valve cable (23) and air reservoir (22) in
four reservoir mounting brackets (18).
NOTE
When assembling air reservoirs
and mounting brackets, do not
over tighten nut and lockwasher.
Tighten nut until lockwasher is
fully compressed.
(21)
With the aid of an assistant, install two
screws (21), lockwashers (20) and nuts (19)
in reservoir mounting brackets (18).
(22)
Tighten two locknuts (16) and screws (17)
on brackets (15).
(23)
Install two mounting clips (14),
washers (13), lockwashers (12) and
screws (11) on air reservoir brackets (15).
|
