|
| |
TM 9-2320-364-20-4
12-148
12-31. AIR RESERVOIR NO. 5 REPLACEMENT (CONT).
(11)
Install two air reservoir brackets (7),
screws (19) and locknut (18) on frame (20).
NOTE
Cushion clamp is installed with
same mounting hardware that
mounts inside rear air reservoir
mounting bracket.
(12)
Install four air reservoir mounting
brackets (15), screws (6), cushion clamp
(17) and four locknuts (5) on two air
reservoir brackets (7).
(13)
With the aid of an assistant, position air
reservoir (16) in four air reservoir mounting
brackets (15).
NOTE
When assembling air reservoirs
and mounting brackets, do not
over tighten nut and lockwasher.
Tighten nut until lockwasher is
fully compressed.
(14)
With the aid of an assistant, install two
screws (14), lockwashers (13) and nuts (12)
in four air reservoir mounting brackets (15).
Tighten nut until lockwasher is compressed.
(15)
Tighten two nuts (12) and screws (14) on
brackets (15).
(16)
Install two mounting clips (11),
washers (10), lockwashers (9) and
screws (8) on air reservoir bracket (7).
|
