|
| |
TM 9-2320-364-20-4
12-151
b.
Installation.
NOTE
If truck is equipped with an
arctic kit, position front
gladhand bracket between front
crossmember and arctic pump
bracket during installation.
(1)
Install front gladhand bracket (4) on front
crossmember (9) with four screws (8) and
locknuts (7).
NOTE
Perform Step (2) if name plates
were removed.
(2)
Install two nameplates (11) on front
gladhand bracket (4) with four drive
screws (10).
(3)
Insert connector wires (6) in slot of front
gladhand bracket (4). Slide rubber boot (5)
forward.
(4)
Install connector (3) on front gladhand
bracket (4) with two screws (2) and
locknuts (1).
c.
Follow-On Maintenance:
Install front double check valves, (Para 12-11).
Install front gladhands, (Para 12-43).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
