|
| |
TM 9-2320-364-20-4
12-153
NOTE
Left hand load sensing valve
shown.
(5)
Remove nut (9), lockwasher (10) and lower
head link (11) from axle bracket (12).
Discard lockwasher.
(6)
Remove two locknuts (13), screws (14) and
load sensing valve (15) from load sensing
valve bracket (16). Discard locknuts.
(7)
Remove two locknuts (17), screws (18) and
load sensing valve bracket (16) from
frame (19). Discard locknut.
(8)
Loosen jam nut (20) and remove link
assembly (21) from control spring (22).
(9)
Loosen jam nut (23) and remove control
spring (22) from load sensing valve (15).
NOTE
If removing left side load
sensing valve shown,
perform Step (10).
If removing right side load
sensing valve, perform
Step (11).
Note location of elbows and
tees prior to removal.
(10)
Remove two elbows (8) and (4) from load
sensing valve (15).
(11)
Remove elbow (8) and tee (6) from load
sensing valve (15).
|
