|
| |
TM 9-2320-364-20-4
12-165
Air reservoir will fall when
screws are removed. Support air
reservoir prior to removing
screws to prevent injury to
personnel.
(3)
With the aid of an assistant, remove two
nuts (6), lockwashers (7), screws (8) and air
reservoir (2) from two brackets (9). Discard
lockwashers.
NOTE
Note position of elbows, plug and
drain valve prior to removal.
(4)
Remove two elbows (5), drain valve (1) and
plug (10) from air reservoir (2).
b.
Installation.
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Install elbows, plug and drain
valve as noted prior to removal.
(1)
Apply sealing compound on threads of two
elbows (5), drain valve (1) and plug (10).
(2)
Install two elbows (5), drain valve (1) and
plug (10) on air reservoir (2).
|
