|
| |
TM 9-2320-364-20-4
12-197
(7)
Remove two locknuts (21), screws (22) and
manifold (20) from solenoid mounting
bracket (23).
(8)
Remove two screws (24) and solenoid
mounting bracket (23) from air
manifold (25).
b.
Installation.
(1)
Install solenoid mounting bracket (23) on air
manifold (25) with two screws (24).
(2)
Install manifold (20) on solenoid mounting
bracket (23) with two screws (22) and
locknuts (21).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(3)
Apply sealing compound on threads of
plug (19), or 90 degree elbow (10), fitting
(18), 90 degree elbow (17) and three 45
degree elbows (16).
NOTE
Install fittings as noted prior to
removal.
(4)
Working from bottom to top, install
plug (19), or 90 degree elbow (10), three 45
degree elbows (16), 90 degree elbow (17)
and fitting (18) in manifold (20).
(5)
Install air line 2412 (11), air line 2923 (12),
air line 2074 (13), air line 2069 (14) and air
line 2071 (15) on fitting (18), 90 degree
elbow (17) and three 45 degree elbows (16).
NOTE
Perform Step (6) if truck is
equipped with air horn.
(6)
Install air line 2037 on 90 degree elbow (10).
12
17
18
20
16
15
14
13
11
19
10
9
20
AIR HORN
ONLY
|
